Model NO.: G100-36F
Charger Type: LiFePO4 Battery Charger
Nominal Voltage: 43.2V
Size: 170 X 70 X 51mm
Socket Type: VDE,UL,CCC,UK,PSE,SAA,CCC,TUV
for Use: Standard Battery
Recovery Function: Yes
Reverse Potection: Yes
Delivery Date: About 15 Days After Confirm Order
Transport Package: Industrial Packaging
Type: LiFePO4 Battery
Charger Application: Electric Wheelchair, Electric Scooter
Compatible Battery Type: 38.4 Volt (12cells) 2~12ah LiFePO4 Battery
Certification: RoHS, UL, CE
Case: PC+ABS Plastic
Short Circuit Protection: Yes
MCU Controller: Yes
Specification: 43.2V 2.0A
HS Code: 8504409990
|Output: 43.2V 2.0A|
|Charge Process: CC(pre-charge)-CC(bulk)-CV-cutoff|
|Charger Indicator: With 20%~100% 4 LEDs Battery Meter|
|Output Protections: Short-circuit, Reverse Polarity...|
|Safety Approval: CE cUL Approved|
|Size: 170 x 71 x 41mm (plastic)|
|Suit for Battery: 38.4 Volt (12Cells) 2~12Ah LiFePo4 Battery Charger|
G100-36F family products are main member of Taizhou Jarila electromechanical Co., Ltd. It represents today's new technology for 38.4V 12 Cell LiFePo4 battery pack charging. G100-36F programmed 4 auto stages (Pre-CC-CV-Cutoff) charging process, It is designed for 3~25Ah LiFePo4 battery pack. Stage "Pre" is a pre-charge function for deep discharged battery pack, this is helpful for battery's cycle life. The pre-charge current is less than 1/3 C.C value. When the battery recovered by pre-charge small current, stage "CC" will give constant current charging, the charge current up to 90W. Then, "CV" stage is followed, the output voltage is limited on C.V value, until the charge current declined to 1/8 C.C. At this stage, the battery is charged completely and the charger will cut off output automatic.
Further, G100-36F can display the charging process, indicate the battery capacity from 25% to 100% timely. This is helpful for user.
For more safety, G100-36F will inter protection mode when the battery polarity reversed our the output connectors shorted.
General Specification for G100-36F
|Input Voltage: AC 100~240V 50/60Hz|
|Input Current: Max. 1.6A|
|Cooling||No fan designing, natural convection. Do not cover the charger.|
|Charge process||Auto 4 stages: Pre-CC-CV-Cutoff|
Cut-off when charge finished.
|Battery||38.4V 12 Cell LiFePo4 Battery-pack.|
|Size||170 x 70 x 51mm|
|Enclosure||ABS+PC Plastic housing, inlet type C8 or C14|
How to use:
1.Connect the AC cord to the socket, The "power" lamp will light on solid.
2.Connect positive charger clip (red) to positive battery terminal, the black clip to negative. (You can use other dc plugs to connect battery), the "25%~100%" lamps will light on flowing. If the battery polarity reversed or output shorted, "Warning" lamp will flashing, please check the setup.
3.Depend on the charged capacity, 25%~100% lamps will lights up solid sequence, until the battery is fully charged. Then you can power off the charger and disconnect the battery or you can charge a new battery if you need.
An example shows the duration of 80% state charged for an empty battery.